From June 21 to 24, 2016, the Munich International Robotics and Automation Technology Exhibition will be held in Munich, Germany as scheduled. The exhibition is the most well-known international exhibition in the field of robotics and automation, and important figures in the field of robotics and automation from all over the world will gather here.
Since 2004, the exhibition has been held in Munich every two years, and this year is the seventh. This exhibition is the first professional exhibition in the world where all aspects of robotics and automation technology are exhibited together as independent projects, aiming to showcase the entire value-added industrial chain of the robotic automation industry. For more than ten years, the German Robotics Exhibition has become the world's largest and most important robot and automation technology exhibition.
Leader Harmonious Drive Systems Co., Ltd is a high-tech enterprise specializing in the research and development, design and production of precision harmonic drive devices. It is located in Suzhou, the most dynamic area of my country's social and economic development. The company has been engaged in the research and development of precision harmonic reducers for robots since 2003. The main production and inspection equipment adopts the current world-class advanced equipment; the company has strong technical force and has its own research and development center. The research and development funds for harmonic drives are averaged every year. More than 10 million; has more than 40 national patents in the field of harmonic transmission; is the main drafting of the national standards of GB/T30819-2014 "Harmonic Gear Reducer for Robots" and "Test Methods for Small Modulus Precision Gear Transmissions" square. The company's precision harmonic reducer has been tested by many institutions and enterprises, and has reached the international advanced level in terms of accuracy, life, stability, and noise. After the products were introduced to the market, they were well received by domestic and foreign robot manufacturers.
The booth of Leaderdrive is located in Hall B5, and the booth number is B5-431A. In this exhibition, Leaderdrive will showcase the existing seventeen series of more than 500 kinds of precision harmonic reducers, and show customers the harmonic zero error precision transmission on the spot, so as to show international customers in recent years. The progress made by Leaderdrive in the field of harmonic drives further expands Leaderdrive 's international reputation and lays a solid foundation for increasing Leaderdrive 's harmonic reducer's global market share to 20% within five years.
The LHS-I/LHSG-I series flex spline is a hollow-flanged standard barrel structure. The whole machine has a compact structure. The input shaft is directly matched with the inner hole of the wave generator and connected by a flat key. It can be used in the connection mode of rigid wheel end fixed and flexible wheel end output; it can also be used in the connection mode of flexible wheel end fixed and rigid wheel end output.
The LHSG-I series is a high-torque model with the same structure, link mode, input and output mode as the LHS-I series reducer, but the torque carrying capacity is 30% higher than that of the LHS series.
The LHS-II/LHSG-II series flex spline is a hollow-flanged standard barrel structure, and the whole machine has a compact structure. The input shaft is connected to the inner hole of the wave generator through a cross slider coupling. It can be used in the connection mode of rigid wheel end fixed and flexible wheel end output; it can also be used in the connection mode of flexible wheel end fixed and rigid wheel end output.
The LHSG-II series is a high-torque model with the same structure, connection mode, input and output mode as the LHS-I series reducer, but the torque carrying capacity is 30% higher than that of the LHS series.
The LHS-III series flex spline is a hollow flanged standard tube structure. There is a large-diameter hollow shaft hole in the middle of the wave generator cam. The reducer is designed with a support bearing inside. The fully sealed structure is easy to install. It is very suitable for the center of the reducer. Use when threading. The LHSG-III series is a high-torque model with the same structure, connection mode, input and output mode as the LHS-I series reducer, but the torque carrying capacity is 30% higher than that of the LHS series.
This series is based on the LHS-III/LHSG-III series harmonic reducer. Through the optimization of structure and materials, the weight of the harmonic reducer is greatly reduced while maintaining the original performance parameters. After being used on industrial robots, it can withstand faster speeds and larger loads.
The LHS-IV/LHSG-IV series flex spline is a hollow-flanged standard barrel structure. The wave generator cam has its own input shaft. The reducer is designed with a supporting bearing. The fully sealed structure is easy to install. It is very suitable for the input. It is used when installing bevel gear or synchronous belt transmission.
The LHSG-IV series is a high-torque model with the same structure, connection mode, input and output mode as the LHS-I series reducer, but the torque carrying capacity is 30% higher than that of the LHS series.
The flex spline of the LCD series has an ultra-thin cup-shaped structure. The entire machine is designed with an ultra-flat structure, small in size and light in weight, and is very suitable for use as a robot end joint and a reducer for the client.
The LCS-I/LCSG-I series flex spline is a cup-shaped standard cylinder structure, and the input shaft is directly matched with the inner hole of the wave generator and connected by a flat key. Generally, the rigid wheel end is fixed and the flexible wheel end is output.
LCSG-I series is a high-torque model. Its structure, link mode, input and output mode are the same as LHS-I series reducers, but the torque carrying capacity is 30% higher than that of LCS series.
The LCS-II/LCSG-II series flex spline is a cup-shaped standard cylinder structure, and the input shaft is connected to the inner hole of the wave generator through a cross slider coupling. Generally, the rigid wheel end is fixed and the flexible wheel end is output.
LCSG-II series is a high-torque model. Its structure, link mode, input and output mode are the same as LHS-I series reducers, but the torque carrying capacity is 30% higher than LCS series.
The flexible wheel of the LHD series harmonic reducer has an ultra-thin hollow flanging structure, and the design of the whole machine has reached the limit of flatness, which is very suitable for use in occasions with strict thickness requirements for the reducer.
Publication Date: 6 June, 2016
Category:
Company News
